TTT-1: Questions Answers Correct And Verified

Study Guides Aug 17, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

TTT-1: Questions & Answers (Correct And Verified)

  • When completing a visual inspection of a foundation, what are one of the
  • key items to look for? Right Ans - D. Cracks

  • What term is used to describe the rules written by the department of labor?
  • Right Ans - B. Standards

  • What is the purpose of a turnbuckle when working with guy wires? Right
  • Ans - C Tensioning

  • The basket slings on a pole perform what function? Right Ans - C.
  • Support all the combined weight

  • A synthetic rope has a breaking strength of 6,600 pounds and a bowline
  • knot is tied to make a lifting eye, what is the maximum gross load that can be lifted? Right Ans - D. 660 Ibs

  • When working how often should fall protection equipment be inspected?
  • Right Ans - A. Daily before use

  • When a U-bolt is properly tightened, what is the result? Right Ans - A.
  • Both sides are tightened evenly

  • When using bolts or U-bolts with a slotted hole present, in what order are
  • the components installed Right Ans - A. Flat washer, Lock washer, nut

  • If the wire rope load line on a base mounted hoist has a breaking strength of
  • 26,500 pounds, what is my actual Working Load Limit (WLL) Right Ans - C.5,300

  • Who is responsible for providing the applicable PPE for a work site?
  • Right Ans - B. Employer

  • What equipment does an operator use? Right Ans - C. Winches, cranes,
  • and other applicable units

  • When using an extension ladder, how many feet past the platform must it
  • extend Right Ans - C. 3 feet 1 / 2

  • For power lines rated 50kV, the maximum clearance between the lines and
  • any part of the crane or load shall be? Right Ans - A. 10 feet

  • What motion indicates retract the boom Right Ans - B
  • In the fall protection hierarchy system, what is the term used for stopping
  • free fall? Right Ans - D Fall Arrest

  • What is the most common power source used for a capstan hoist? Right
  • Ans - B Electric Power

  • The cantilever, by definition, is the distance between the bridle slings and
  • rooster head sheave true or false? Right Ans - A true

  • What is a crown block? Right Ans - B An upper sheave assembly on top
  • of a structure

  • If you have a sixteen foot ladder leaning against a building wall, how many
  • feet from the wall does the base need to be to provide the correct slope?Right Ans - C 4 feet 20.at a minimum, how often must a competent rescuer have refresher training? Right Ans - A 1 year

  • An antenna that can transmit signals up to 360 degrees is called? Right
  • Ans - B Omni-directional

  • An RF monitor should be worn in areas of unknown RF exposure Right
  • Ans - A true

23. What is the FS specified for blocks? Right Ans - B 4:01

  • What is a tag line? Right Ans - C A separate rope attached to the load
  • being lifted

  • What do the letters PPE stand for? Right Ans - D Personal Protective
  • equipment

  • / 2

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: Study Guides
Added: Aug 17, 2025
Description:

TTT-1: Questions & Answers (Correct And Verified) 1. When completing a visual inspection of a foundation, what are one of the key items to look for? Right Ans - D. Cracks 2. What term is used to de...

Get this document $30.00