- | Page
SHP FINAL EXAM QUEST IONS
WITH 100% CORRECT ANSWER S
Question : The firefighter may be installed next to a
stand-alone battery smoke detector
CORRECT ANSWER : True
Question : When performing a full system test, you may
bypass any open doors or windows
CORRECT ANSWER : False
Question : When programming an skey1,you must
CORRECT ANSWER : Always enable the emergency
Question : When running power to the take345,polarity
doesn't apply
CORRECT ANSWER : False
Question : When programming the emergency key for the
skey1,which zone/sensor type is used.
- | Page
CORRECT ANSWER : Audible alarm (7)
Question : When installing a smkt3,you must use the
included screws and anchors
CORRECT ANSWER : True
Question : When installing the firefighter, it is required to
test the customers existing smoke detectors
CORRECT ANSWER : True
Question : When installing a Dw21, where is the
approved location for the sensor
CORRECT ANSWER : Between 6"(15cm) and 2'(61cm)
from floor
Question : When installing a dw11 on a vinyl or metal
frame, what should primarily use to mount the sensor
CORRECT ANSWER : Provided double sided tape
- | Page
Question : Which of the following materials can you use
to group multiple ground terminals in a takeover.
CORRECT ANSWER : Beans & wire caps
Question : Which of the following sensors are you not
allowed to program using a translator
CORRECT ANSWER : Smoke detector
Question : When installing the take345, you must always
test the new 12v battery before using it.
CORRECT ANSWER : True
Question : What is the output voltage of transformer used
to power the sky control
CORRECT ANSWER : 16.5
Question : What is the minimum distance for placement
of a co3 from the corners of the wall
CORRECT ANSWER : 12"
- | Page
Question : The smkt3 has 2 function:smoke and heat detection
CORRECT ANSWER : False
Question : How would you program a co3 if mounted on
a hallway wall
CORRECT ANSWER : Loop 1 Zone 14
Question : When installing a translator, you must program
all of the existing sensors as new equipment on the panel
CORRECT ANSWER: False
Question : The dw21 should always be installed in the
door frame
CORRECT ANSWER : True
Question : Which of the following zone/sensor types are
correct when programming an smkt3
CORRECT ANSWER : (09) Smoke detector. (09) Heat
detector. (08) Freeze