Rope Rescue Ops IFSI test questions and

Rope Rescue Ops IFSI test questions and answers

Question : All riggin shall have how many checks prior to

Loading?

Correct answer: 3

Question : All equip. that falls 3 ft onto a hard surface shall be

checked for:

Correct answer: Burs, sharp edges, dirt, contaminates, lose

parts and deformaties

Question : Rope deployed from the anchor point to the ground

should be deployed:

Correct answer: So only the amount needed is with a dynamic

anchor

Question : Helmets used for rope rescue should be:

Correct answer: Lighter in weight

Question : Rope gloves shall be

Correct answer: Sturdy formfitting gloves with a leather palm

Question : T/F: Fall protection (travel restraint) at the edge shall be long enough for the edge attendant to go over the edge and no farther

Correct answer: False

Question : A class one harness is designed to stop rescuer

when he:

Correct answer: Reaches the edge

Question : T/F: Class two harnesses are designed for 600 lb loads and will not keep the rescuer in an up-right position if they become unconscious.

Correct answer: True

Question : Class three harnesses are:

Correct answer: Designed to keep the rescuer or victim in an

up-right position

Question : T/F: A person that falls in a harness and is suspended and unable to stand on a solid surface should lift their legs into a sitting position and avoid moving.

Correct answer: True

Question : T/F: When working in a harness with free mobility a person should keep your legs moving as much as possible

Correct answer: True

Question : T/F: A person that falls and is trapped and unable to lift their legs should squeeze their legs legs every 5 seconds until help arrives

Correct answer: True

Question : The 1st medical consideration for a victim in a

class three harness that falls and becomes unconscious is:

Correct answer: Airway patency

Question : When a person is rescued from harness suspension

they should be:

Correct answer: Assessed, ABC's, immobilization and

transported in a sitting position

Question : All harness construction and testing standards are

covered in NFPA:

Correct answer: 1983

Question : T/F: Personnel at a rescue scene whether they are workers, IC, safety officer all have the ability to call a stop during rope rescue operations if they see an unsafe operation

Correct answer: True

Question : A helmet used for repor rescue should be an

approved light weight helmet with a:

Correct answer: 3 point strap position under the chin

Question : Care and maintenance of all rescue equipment

should be per:

Correct answer: the helmet's manufacturer recommendations