NEIEP 500 Final Exam 2023 Updated Version Questions and Correct Answers Guaranteed Success #14 (505 pg. 36) - Correct Answer What is the minimum size wire allowed be code for wiring 100 VAC lighting circuits to elevator cars?
- 1/2 inch (525 pg.12) - Correct Answer What is the maximum clearance allowed
between the hoistway sill and the platform sill for passenger elevators?
- (555 pg. 26) - Correct Answer How many turns of safety rope must remain on the
safety drum after a rated load and rated speed test of a winding drum operated safety?
- feet (510 pg. 21) - Correct Answer What is the minimum overhead clearance for
raceways mounted in the machine room overhead?
18 inches (525 pg 16) - Correct Answer You are adjusting the passenger doors for a traction drive with generator field control. What is the maximum distance the car can be from floor level before the doors unlock?
42 inches - Correct Answer What is the minimum height of a barricade placed around as open hoistway?
42 inches (525 pg. 21)f - Correct Answer You are installing push button boxes in a high rise building. What is the maximum height that they can be located from the floor level to the center of the fixture?
45 inches (515 pg. 8) - Correct Answer What is the minimum loop size for 1 1/2 inch traveling cable?
100 feet (510 pg. 10) - Correct Answer On high rise of raceways, the wires must be supported at least how many feet?
360 degrees - Correct Answer When bending conduit, what is the maximum number of bends in degrees between access points?
All splices must be accessible after installation is complete - Correct Answer Which of the following is correct about splicing wires?
door clutch (530 pg. 30) - Correct Answer Which of the following components is used to engage and couple the car door to the hoistway door during opening and closing?
During the closing sequence the A1 terminal on the armature is positive. (530 pg. 13) - Correct Answer Refer to figure 3. Which of the following statements is correct?
- / 1