IPC-A-610 Rev G EXAM QUESTIONS AND

IPC-A-610 Rev G EXAM QUESTIONS AND ANSWERS 100% SOLVED (Newest 2025) Flexible and Rigid-Flex Printed Circuitry - Solder Wicking -> Defect Class 1, 2, 3 - Correct Answers ✅Spacing as a result of solder wicking or plating migration violate minimum electrical clearance Attachment -> Acceptable Class 1 - Correct Answers ✅Side overhang of flex 10-27 Attachment -> Acceptable Class 2,3 - Correct Answers ✅Side overhang10-27 Attachme - Correct Answers ✅Wetted solder is visible in 10-27 Marking - Correct Answers ✅Provides both product identification and traceability Marking - Etched - Acceptable Class 1,2,3 - Correct Answers ✅Lines of a number or letter may be broken provided the breaks do not make the marking illegible Marking Etched (including hand printing) - Defect Class 1.2.3

• Correct Answers ✅Lines forming a character are missing

or broken to the extent that the character is not legible or is likely to be confused with another character 1 / 2

IPC-A-610 Rev G EXAM QUESTIONS AND ANSWERS 100% SOLVED (Newest 2025) Marking - Screened | Process Indicator - Class 1,2,3 - Correct Answers ✅Lines of a number or letter may be broken (or the ink thin over a portion of Marking - Screened | Defect - Class 1,2,3 - Correct Answers ✅Open areas of characters are filled and are not legible, or are likely to be confused with another number or letter Marking - Stamped | Acceptable - Class 1, Process Indicator - Class 2,3 - Correct Answers ✅- Marking that has been smeared or blurred but is still legible

• Multiple stamped markings are acceptable provided the

general intent can be determined Marking - Laser | Acceptable - Class 1, Process Indicator - Class 2,3 - Correct Answers ✅- Multiple image is still legible

• Missing marking is not more than 10% of the character

kjlkj - Correct Answers ✅ Marking - Lables - Readability | Acceptable - Class 1,2,3 - Correct Answers ✅Spots or voids on printed surfaces or machine is readable code as permiss

• / 2