- | P a g e
ICC BOLTING EXAM NEWEST 2025 ACTUAL EXAM
COMPLETE 150 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS )
|ALREADY GRADED A+ ||BRAND NEW!!
According to the Specification for Structural Joints not fewer than "blank" complete fastener assemblies of each combination of diameter, length and grade are to be checked at the job site in the tension calibrator? - ANSWER-three - Section 7.2 - Specification for Structural Joints
According to the Specification for Structural Joints, what type of high-strength bolted joint installations do not require tension calibrator tension verification tests? - ANSWER-Snug Tightened Joints - sections 7.1 & 8 - Specification for Structural Joints
According to the Specification for Structural Joints,the "blank" has the option of approving the use of oversized and slotted holes? - ANSWER-engineer of record - Sections 3.3.2, 3.3.3, and 3.3.4 -Specification for Structural Joints
According to the Specification for Structural Joints, what party is responsible for specifying the high-strength joint type to be 1 / 4
- | P a g e
used for bolt installation? - ANSWER-engineer of record - Section 4.0 - Specification for Structural Joints
According to the Specification for Structural Joints, which of the following is true regarding reuse of high-strength bolts? - ANSWER-A490 and galvanized A325 bolts shall not be reused - 2.3.3 - Specification for Structural Joints
According to the Specification for Structural Joints, how can high-strength bolts and nuts be identified on the job site? - ANSWER-Bolt and nut markings - Figure C-2.1 - Specification for Structural Joints
According to the Specification for Structural Joints, where calibrated pretensioning is used, how often is the installation wrench to be calibrated by testing in a tension calibrator? - ANSWER-daily - Section 8.2.2 - Specification for Structural Joints
According to the Specification for Structural Joints, what inspection task is unique to the twist-off type tension control bolt pretensioning? - ANSWER-checking for severed splined bolt ends - Section 8.2.3 - Specification for Structural Joints
- / 4
- | P a g e
According to the Specification for Structural Joints, a direct
tension indicator looks like: - ANSWER-A washer with arch-
like protrusions on the bearing surface. - Section 8.2.4 and associated commentary - Specification for Structural Joints
According to the Specification for Structural Joints, when bolts are installed by the direct-tension indicator, they are verified for
the correct tension by: - ANSWER-Measuring the gap between
the direct tension indicator and the bolt head. - Section 8.2.4 and associated commentary - Specification for Structural Joints
According to the Specification for Structural Joints, the inspection task that is common to all of the allowable methods
of pretensioning high-strength bolts is: - ANSWER-Checking
the condition of the bolt and the washer from storage, Checking the markings on the bolts and washers, and Observing the required pre-installation testing for bolt tension. - Section 9 - Specification for Structural Joints
According to the Specification for Structural Joints, what is not included in the inspection for the snug tight method of installation? - ANSWER-Clamping force from the bolt. - Section 9.1 - Specification for Structural Joints
- / 4
- | P a g e
According to the Specification for Structural Joints, what additional inspection is required for slip-critical joints? - ANSWER-Checking the condition of faying surfaces - Sections
3.2.2 and 9.3 - Specification for Structural Joints
What is the ASTM standard for high-strength bolts? - ANSWER-A325 and A490 - Glossary and Section 2.3.1 - Specification for Structural Joints
What is the ASTM Standard for high-strength nuts? - ANSWER-A563 - Section 2.4.1 - Specification for Structural Joints
What is the ASTM Standard for high-strength washers? - ANSWER-F436 - Section 2.5 - Specification for Structural Joints
What is the ASTM Standard for compressible washer-type direct tension indicators? - ANSWER-F959 - Section 2.6.1 - Specification for Structural Joints
- / 4