FAE FIRE APPARATUS - QUESTIONS AND ANSWER S (UPDATED AND VERIFIED) Q...

Study Guides Aug 18, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

  • | Page

FAE (FIRE APPARATUS

ENGINEER) ILLINOIS EXAM

QUESTIONS AND ANSWER S

(UPDATED AND VERIFIED)

Question :What does one cubic foot of water weigh?

Correct answer:62.5 lbs

Question :What does One cubic foot of water contain in

inches?

Correct answer:1.728 cubic inches

Question :What does One cubic foot of water contain in

gallons?

Correct answer:7.5 gallons

Question :What does One gallon of water weigh?

Correct answer:8.35 lbs

  • | Page

Question :What does One gallon of water contain in

inches?

Correct answer:231 cubic inches

Question :How high will One psi elevate water?

Correct answer:2.304 feet

Question :What is atmospheric pressure at sea level?

Correct answer:14.7 psi

Question :What is the maximum lift for drafting?

(Theoretically)

Correct answer:34 feet

Question :How high does One inch (1") mercury (inches

in vacuum) lift?

Correct answer:1.13 feet of lift

  • | Page

Question :What is the recommended minimum psi that

should be maintained on the compound gauge when taking water from a hydrant?

Correct answer:10 psi

Question :What is Static pressure?

Correct answer:Stored or potential energy that is available

to force water through pipes and fittings, fire hose, and adapters.

Question :What are all the steps in Certification Test (pre-

service tests)?Correct answer:1. 2 Hour: 100% @ 150 psi

2. 1/2 hour: 70% @ 200 psi

3. 1/2 hour: 50% @ 250 psi

4. 10 minutes: 100% @ 165 psi (overload or spurt test)

Question :What is a Spurt or Overload test?

Correct answer:100% @ 165 psi (done in certification test

for 10 minutes)

  • | Page

Question :What are all the steps in a Service Test?

Correct answer:1. 20 minutes: 100% @ 150 psi

2. 10 minutes: 70 % @ 200 psi

3. 10 minutes: 50% @ 250 psi

Optional: 100% @ 165 psi (overload or spurt test)

Question :What are Pump Tests?

Correct answer:100% capacity @ 150 psi net pump

pressure 70% capacity @ 200 psi net pump pressure 50% capacity @ 250 psi net pump pressure

Question :What is Net Engine/Pump Pressure (NEP)?

Correct answer:Net Pump Pressure (NEP) is the

measurement of the total work performed by the pump:

  • To lift water into the pump (drafting)
  • To discharge water from the pump

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: Study Guides
Added: Aug 18, 2025
Description:

FAE (FIRE APPARATUS ENGINEER) ILLINOIS EXAM QUESTIONS AND ANSWER S (UPDATED AND VERIFIED) Question :What does one cubic foot of water weigh? Correct answer:62.5 lbs Question :What does One cubic fo...

Get this document $30.00