NFPA 10 Standard PFE 2018ed (1-7) Exam Questions and Answers (Solved Papers) The provisions of this standard apply to the selection, installation, inspection, maintenance, recharging, and testing of portable fire extinguishers and Class D extinguishing agents. - Correct Answers ✅Scope This standard is prepared for use by and guidance of persons charged with selecting, purchasing, installing, approving, listing, designing, and maintaining portable fire extinguishers and Class D extinguishing agents. - Correct Answers ✅Purpose Metric units of measurement in this standard are in accordance with the modernized metric system known as the
- Correct Answers ✅International System of Units (SI)
- gal - 3.785L - Correct Answers ✅Liter (L)
- psi = 0.0689 bar - Correct Answers ✅Bar
multiply the quantity by the conversion factor and then round the result to the appropriate number of significant digits - Correct Answers ✅Conversion Procedure American Coatings Association, Hazardous Materials Identification System (HMIS) - Correct Answers ✅ACA 1 / 4
NFPA 10 Standard PFE 2018ed (1-7) Exam Questions and Answers (Solved Papers) Underwriters Laboratories Inc., UL 1093, Standard for Halogenated Agent Fire Extinguishers & UL 1803, Standard for Factory - Correct Answers ✅UL Underwriters' Laboratories of Canada, CAN/ULC-S512, Standard for Halogenated Agent - Correct Answers ✅ULC American Nation Standards Institute - Correct Answers
✅ANSI
Acceptable to the authority having jurisdiction. - Correct Answers ✅Approved Authority Having Jurisdiction - Correct Answers ✅AHJ An organization, office, or individual responsible for enforcing the requirements of a code or standard, or for approving equipment, materials, an installation, or a procedure. - Correct Answers ✅Authority Having Jurisdication Equipment or materials to which has been attached a label, symbol, or other identifying mark of an organization that is acceptable to the authority having jurisdiction and concerned 2 / 4
NFPA 10 Standard PFE 2018ed (1-7) Exam Questions and Answers (Solved Papers) with product evaluation, that maintains periodic inspection of production of labeled equipment or materials, and by whose labeling the manufacturer indicates compliance with appropriate standards or performance in a specified manner.
- Correct Answers ✅Labeled
- Correct Answers ✅Listed
Equipment, materials, or services included in a list published by an organization that is acceptable to the authority having jurisdiction and concerned with evaluation of products or services, that maintains periodic inspection of production of listed equipment or materials or periodic evaluation of services, and whose listing states that either the equipment, material, or service meets appropriate designated standards or has been tested and found suitable for a specified purpose.
Indicates a mandatory requirement. - Correct Answers ✅Shall Indicates a recommendation or that which is advised but not required. - Correct Answers ✅Should Includes NFPA Standard, including Codes, Standards, Recommended Practices and Guides - Correct Answers ✅Standard 3 / 4
NFPA 10 Standard PFE 2018ed (1-7) Exam Questions and Answers (Solved Papers) Loaded Stream Charge - Correct Answers ✅Antifreeze Charge A colorless, odorless, electrically nonconductive inert gas that is a suitable medium for extinguishing Class B and Class C fires. - Correct Answers ✅Carbon Dioxide Dry Chemical and Wet Chemical - Correct Answers ✅2 Type of Chemicals A powder composed of very small particles, usually sodium bicarbonate-, potassium bicarbonate-, or ammonium phosphate-based with added particulate material supplemented by special treatment to provide resistance to packing, resistance to moisture absorption (caking), and the proper flow capabilities. - Correct Answers ✅Dry Chemical an aqueous solution of organic or inorganic salts or a combination thereof that forms an extinguishing agent. - Correct Answers ✅Wet Chemical
- / 4