RQI 2025 BLS Healthcare Provider Exam Questions and Answers 100% Correct
Question : You tap and shout to check for responsiveness, but
the patient does not respond. What is your next step after calling for help?
- Wait for the code team to arrive
- Immediately being CPR
- Check for breathing and a pulse
- Turn on the AED
Correct answer: o Check for breathing and a pulse
Question : After check for breathing and a pulse, you find that
the patient is not breathing normally but has a pulse and needs rescue breathing. What is the correct ventilation rate?
- 2 breaths every 3-5 seconds, or about 24-40 breaths per
- 2 breaths every 6 seconds, or about 20 breaths per minute
- 1 breath every 3-5 seconds, or about 12-20 breaths per
minute
minute
- 1 breath every 6 seconds, or about 10 breaths per minute
Correct answer: o 1 breath every 6 seconds, or about 10
breaths per minute
Question : After 4 minutes of rescue breathing, no pulse is
present during a pulse check. What immediate actions should be taken?
- Turn on the AED while your colleague attaches the pads to
- Continue providing rescue breaths and turn on the AED
- Immediately being CPR while your colleague counts
- Immediately being CPR and turn on the AED
the patient's chest
compressions out loud
Correct answer: o Immediately being CPR and turn on the
AED
Question : As you are providing CPR, your colleague arrives,
turns on the AED, and follows the prompts. The AED analyses the rhythm and does not advise a shock. After you immediately resume CPR, how do you continue treating the patient?
- Continue CPR until you are fatigued, the code team arrives,
- Continue CPR for 2 minutes, and then deliver rescue
- Continue CPR until promoted by the AED to allow a
- Continue CPR, power off the AED, remove the pads, and
or the patient starts to move
breathing until the code team arrives or the patient starts to move
rhythm check, the code team arrives or the patient starts to move
wait until the code team arrives or the patient starts to move
Correct answer: o Continue CPR until promoted by the AED
to allow a rhythm check, the code team arrives or the patient starts to move
Question : As you arrive at the patient's side, you assign
individual roles, outlining what each member needs to do during the resuscitation attempt. Which team members are responsible for the following roles?
- Assess the patient and provides compressions - compressor
- Operates the AED - monitor/defibrillator
- Provides ventilation - airway
- Assess the patient and provides compressions - compressor
- Operates the AED - monitor/defibrillator
- Provides ventilation - airway
Correct answer: o Assess the patient and provides
compressions - compressor
- Operates the AED - monitor/defibrillator
- Provides ventilation - airway
Question : Assigning your team members to individual roles
and outlining what each member needs to do during resuscitation attempt is an example of what element of high- performance team dynamics?
- Knowledge sharing
- Mutual respect
- Clear roles and responsibilities
- Constructive intervention
Correct answer: o Clear roles and responsibilities
Question : You and your team have initiated compressions
and ventilation. The AED was attached, and "no shock" was