- | Page
CPSI EXAM SOLVED 100%
CORRECT!!
Question :To be compliant with ASTM 1487, a designer
or manufacturer of playground equipment should
CORRECT ANSWER :provide buyers with a parts list
for the playground
Question :The fish or wedge probe is used to determine
whether or not a hazard exists on
CORRECT ANSWER :a partially bounded opening
Question :Which of the following is correct regarding the
impact-attenuation of surfacing material
CORRECT ANSWER :Critical height must equal or
exceed fall height
Question :When evaluating the structural integrity of a
support structure for a swing that appears to be failing, a CPSI should
- | Page
CORRECT ANSWER :hire a licensed professional
engineer to certify the integrity of the equipment
Question :Manufacturers of playground equipment must:
CORRECT ANSWER :provide the manufacturer's
identification of the equipment
Question :The majority of injuries associated with
playground equipment result from
CORRECT ANSWER :falls to the surface on which the
equipment was located
Question :An opening may present a common crush or
shear hazard only if it
CORRECT ANSWER :grabs the 5/8" (16mm) dowel
Question :The criteria for unitary surface materials
includes meeting requirements of
CORRECT ANSWER :ASTM F1292 and F1487
- | Page
Question :Regarding playground safety signage, which of
the following is correct
CORRECT ANSWER :Signage may not prevent
accidents but may reduce liability
Question :Which of the following factors is MOST
important when determining the frequency of inspections of surfacing
CORRECT ANSWER :Type of surfacing and amount of
use
Question :When planning a playground for public use, the
play equipment that is chosen must
CORRECT ANSWER :be appropriate for the age of
intended users
Question :A spring rocker with seat height of 26" is about
to be installed adjacent to the side of a fully enclosed bucket swing set. The minimum distance required between the swing set and the rocker is
CORRECT ANSWER :108" or 9'
- | Page
Question :The Site History File for a playground should
contains
CORRECT ANSWER :a comprehensive inventory of all
equipment, a parts list, maintenance, and inspection recommendations
Question :What is the minimum use zone between a
stand-alone climber and a standing-rocking/springing playground piece
CORRECT ANSWER :156" or 13'
Question :The _____ of each play structure shall provide
clear and concise inspection instructions
CORRECT ANSWER :Manufacturer
Question :Heights of guardrails and protective barriers are
determined by which of the following characteristics of children