NCCO Articulating Crane Operator Certification Exam Guide (Latest Update 2025 / 2026) Questions and Answers | Grade A | 100% Correct
Question:
Which of the following standards pertains to articulating boom cranes?
Answer:
ASME B-30.22
Question:
Where should the load's center of gravity be when lifting with forks?
Answer:
On or between the forks
- / 4
Question:
Ancillary lifting attachment capacities
Answer:
May be less than the crane rating
Question:
Wall board forks are not approved for
Answer:
slings
Question:
If you must lift loads of various sizes during the job, you should...
Answer:
Adjust the width of the fork tines as required to assure proper load balance
Question:
Overloading the fork assembly could cause
Answer:
Uncontrollable fork opening
- / 4
Question:
Any rigging devices in use are
Answer:
Considered part of the load
Question:
Material that is slip resistant must be provided
Answer:
At each stand up platform control station
Question:
When operating the crane using remote control, you should never...
Answer:
Walk backwards
Question:
Which of the following is not a capacity deduction?
Answer:
Manual extension in use
- / 4
Question:
When using a manual boom extension
Answer:
You should never exceed the manual extension rating
Question:
When trying to calculate how much a crane can actually lift...
Answer:
Deduct the weight of everything below the boom tip from gross capacity
Question:
If radius falls between stipulated (given) values on the load chart you
Answer:
use the lower capacity
Question:
Rigging and attachment capacity
Answer:
may be a capacity restriction for the lift
- / 4