BICSI Installer 2: Fiber Module Questions
with Complete Solutions (Latest 2025) Code - Correct Answers ✅Addresses the safety of persons, property and the environment associated with the ITS cabling Installation NEC - Correct Answers ✅National electric code Frequency conversion chart - Correct Answers ✅One thousand hertz = 1KHz One million Kilohertz = 1 MHz One billion Megahertz = 1 GHz NFPA - Correct Answers ✅National Fire protection association AHJ - Correct Answers ✅Authorities having jurisdiction TIA/EIA - Correct Answers ✅- Telecommunications Industry association
- Electronic industries alliance
- Industry 1 / 3
BICSI - Correct Answers ✅- Building
BICSI Installer 2: Fiber Module Questions
with Complete Solutions (Latest 2025)
- Consulting
- Service
- International
- Information handling capabilities of the medium
- Number of bits information that can be transported over the
Frequency - Correct Answers ✅Optical pulses using cycles per second, 1 unit of hertz = 1 cycle per second 4hz = 4 cycles per second Definition of transmission - Correct Answers ✅The movement of information in the form of electrical or optical signals from one point to another through a transport medium Refraction - Correct Answers ✅Bending of the light as it passes from one medium into another MHz - Correct Answers ✅- Quantifies the bandwidth of a cabling system in a frequency range
Megabits - Correct Answers ✅- transmission rate
medium(vehicles of the highway) Anatomy of a fiber - Correct Answers ✅- Core 2 / 3
BICSI Installer 2: Fiber Module Questions
with Complete Solutions (Latest 2025)
- Cladding
- Coating
- Impacts the ability of the signal to reach the receiver with
- / 3
Attenuation = - Correct Answers ✅The decrease in magnitude of transmission signal strength between points, expressed in decibel as the ratio of out put to input signal Attenuation [insertion loss] = - Correct Answers ✅Light pulses traveling along fiber are subjected to loss due to absorption or scattering of the light Intrinsic = - Correct Answers ✅Controlled by the manufacture/expresses in decibels per-kilometer impacts the signal to reach the receiver with sufficient power Extrinsic = - Correct Answers ✅Controlled by the installer/expresses in decibels per-kilometer impacts the signal to reach the receiver with sufficient power Attenuation loss = - Correct Answers ✅- Expressed in decibels per kilometers
sufficient power dBm = - Correct Answers ✅Optical power referred to as 1 milliwatt of power