BICSI Installer 2: Fiber Module QA

Study Guides Aug 19, 2025
Loading...

Loading document viewer...

Page 0 of 0

Document Text

BICSI Installer 2: Fiber Module (Q/A)

Code - ✔️ Addresses the safety of persons, property and the environment associated with the ITS cabling Installation NEC - ✔️ National electric code Frequency conversion chart - ✔️ One thousand hertz = 1KHz One million Kilohertz = 1 MHz One billion Megahertz = 1 GHz NFPA - ✔️ National Fire protection association AHJ - ✔️ Authorities having jurisdiction TIA/EIA - ✔️ - Telecommunications Industry association

  • Electronic industries alliance
  • BICSI - ✔️ - Building

  • Industry
  • Consulting
  • Service
  • International
  • Frequency - ✔️ Optical pulses using cycles per second, 1 unit of hertz = 1 cycle per second 4hz = 4 cycles per second Definition of transmission - ✔️ The movement of information in the form of electrical or optical signals from one point to another through a transport medium Refraction - ✔️ Bending of the light as it passes from one medium into another 1 / 2

MHz - ✔️ - Quantifies the bandwidth of a cabling system in a frequency range

  • Information handling capabilities of the medium
  • Megabits - ✔️ - transmission rate

  • Number of bits information that can be transported over the
  • medium(vehicles of the highway) Anatomy of a fiber - ✔️ - Core

  • Cladding
  • Coating
  • Attenuation = - ✔️ The decrease in magnitude of transmission signal strength between points, expressed in decibel as the ratio of out put to input signal Attenuation [insertion loss] = - ✔️ Light pulses traveling along fiber are subjected to loss due to absorption or scattering of the light Intrinsic = - ✔️ Controlled by the manufacture/expresses in decibels per- kilometer impacts the signal to reach the receiver with sufficient power Extrinsic = - ✔️ Controlled by the installer/expresses in decibels per- kilometer impacts the signal to reach the receiver with sufficient power Attenuation loss = - ✔️ - Expressed in decibels per kilometers

  • Impacts the ability of the signal to reach the receiver with sufficient power
  • dBm = - ✔️ Optical power referred to as 1 milliwatt of power CWDM = - ✔️ Coarse wave division multiplexing DWDM = - ✔️ Dense wave division multiplexing APC - ✔️ Angle polish connector SCS = - ✔️ Structured cabling system Tight buffered = - ✔️ Zipcord

  • / 2

Download Document

Buy This Document

$30.00 One-time purchase
Buy Now
  • Full access to this document
  • Download anytime
  • No expiration

Document Information

Category: Study Guides
Added: Aug 19, 2025
Description:

BICSI Installer 2: Fiber Module (Q/A) Code - ✔️ Addresses the safety of persons, property and the environment associated with the ITS cabling Installation NEC - ✔️ National electric code Fr...

Get this document $30.00