Basic Firefighter Written Exam
When using a rotary saw, start all cuts at rpm to prevent blades from binding into the material.(Ans- maximum
is an example of a common prying tool.(Ans- halligan
An swinging door is indicated by the hinges being visible.(Ans- outward
is an example of a pulling tool.(Ans- sheetrock rake
The and the are commonly paired together as "irons".(Ans- halligan Flat head axe
When breaking glass, stand , use the side of the tool and strike the of the pane.(Ans- up-wind blunt/flat corner
When getting a power tool from an apparatus for use on the fire ground, immediately the tool, after warming the tool, and then carry the tool to where it will be used.(Ans- start turn off
A is an example of a striking tool.(Ans- sledge hammer
A is an example of a cutting tool.(Ans- reciprocating saw (Sawzall)
- / 2
When forcing entry through chained gates, you should cut the and not the lock.(Ans- link/chain
What is the order of priorities when suppressing structure fires?(Ans-
- protect exposures
- cut off fire spread
- attack seat of the fire
When advancing a hose-line into a structure, extinguish any fire that is visible and .(Ans- accessible
A vehicle fire should be fought from a degree angle.(Ans- 45
If you are advancing an attack line into a structure and CANNOT see your feet, you should .(Ans- crawl
and are the appropriate hose sizes for attacking a structure fire.(Ans- 2 1/2 1 3/4
Directing fire streams toward the ceiling or wall of a room or building in order to generate large amount of steam is an attack.(Ans- indirect
At a structure fire, the highest priority are close priority fuel tanks and propane cylinders.(Ans- exposures
A attack is discharging water or foam directly onto a burning material.(Ans- direct
- / 2