00104-15 (Introduction to power tools) Trigger lock When using power tools, never engage the _____.Disconnect the power source Before replacing parts such as bits blades, or discs on any tool, you must______.Applied to the drill bit Most hammer drills will not hammer until pressure is _____.When there is no source of electricity A pneumatic drill is commonly used _______.Guard protects you from touching the blade Never use a circular saw that does not have an upper blade guard because the ______.Kerf When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's
_____.
Saber saw 1 / 2
Saws with fine blades that are excellent for delicate and intricate cutting are called ______.Power switch is in the OFF position Before you plug any saw into a power source, make sure the ______.Bandsaw A saw that has a thin, one-piece blade that runs around guides at either end of the saw is a _____.Circular saw A power miter saw combines a miter box with a ____.Hard, heavy materials An angle grinder is used to grind ______.1/8 inch from the grinding wheel The adjustable tool rest on a bench grinder should be positioned _____.Perform a ring test on the wheel A good way to check the condition of the grinding wheel on a bench grinder is to _____.Burr bits
- / 2